[Dragon Ace]

This topic has been started with the intention of seeking the expert's opinion about the parts and upgrades available for Tokyo Marui VSR-10.......

This post has been edited by Dragon Ace: 16 December 2009 - 03:30

[Bodgeups]

I've edited the topic name, as the same upgrade parts for the VSR series will fit the Jing Gong clones.

[Dragon Ace]

Bodgeups, on 16 December 2009 - 09:20 AM, said:

I've edited the topic name, as the same upgrade parts for the VSR series will fit the Jing Gong clones.

Copy that! Much appreciated by the way....

[Walach]

Bodgeups, on 16 December 2009 - 09:20 AM, said:

I've edited the topic name, as the same upgrade parts for the VSR series will fit the Jing Gong clones.

*Edited to remove my moan about grammar*

Related thread in the Snipers Hide:

http://www.ukairsoft...223-vsr-clones/

This post has been edited by Walach: 16 December 2009 - 14:46

[Dragon Ace]

How true that JG stopped manufacturing the enfamous BAR10?

[guard-sniper87]

it is true to an extent , as the uk retailers are finding a batch that aren't riddled with problems ,

[Shaggy]

You'll all be buying vsr's again soon :P *evil laugh*

This post has been edited by Shaggy: 21 December 2009 - 12:05

[guard-sniper87]

haha i wish i never got rid of my g-spec ,

and i will never sell my l96 , one of the best spring version in the sites i play at , only getting better when got the teflon cylinder

[Dragon Ace]

May I present you the "EdGI Full Upgrade Kit for VSR/BAR 10"

Enjoy....

http://i48.tinypic.com/i769oy.jpg

http://i46.tinypic.com/194cgy.jpg

http://i50.tinypic.com/2h7gx3o.jpg

http://i46.tinypic.com/34hc236.jpg

http://i50.tinypic.com/24o1r1c.jpg

http://i48.tinypic.com/x4ltp2.jpg

http://thumbnails16.imagebam.com/6083/073f2160827242.gifhttp://thumbnails25.imagebam.com/6083/89d86060827266.gifhttp://thumbnails23.imagebam.com/6083/078f8860827275.gifhttp://thumbnails4.imagebam.com/6083/55542a60827282.gif

[Shaggy]

I'll have that barrel... :P

[Dragon Ace]

Lol.... :) The above parts will be used in my next project: TM VSR10 G-Spec!

[Duffy]

I wonder how the trigger sear fares up against the Zero trigger..!

[Reign-Mack]

Dragon Ace, on 22 December 2009 - 08:48 PM, said:

Lol.... :) The above parts will be used in my next project: TM VSR10 G-Spec!

nice but you are going to need a different set of inner barrel spacers if you are building a G-spec as its not tapered like the pro,
you will also need to drill a much wider hole in the end of your gspec to fit that inner bull barrel through. Will need to hide the end under the silencer.

This post has been edited by Reign-Mack: 22 December 2009 - 21:11

[Reign-Mack]

http://www.ukairsoftzone.co.uk/forums/public/style_images/master/snapback.png' alt='View Post' />Duffy, on 22 December 2009 - 08:54 PM, said:

I wonder how the trigger sear fares up against the Zero trigger..!

trigger pull wont be nearly as light.

[Dragon Ace]

Duffy, on 22 December 2009 - 08:54 PM, said:

I wonder how the trigger sear fares up against the Zero trigger..!

EdGI's piston has a 45 deg. end and will not be compatible with the Zero trig. :(

Reign-Mack, on 22 December 2009 - 09:04 PM, said:

nice but you are going to need a different set of inner barrel spacers if you are building a G-spec as its not tapered like the pro,
you will also need to drill a much wider hole in the end of your gspec to fit that inner bull barrel through. Will need to hide the end under the silencer.

Your reminder is much appreciated. However, I'm planning to utilise my G-Spec base but I'll be using my spare TM VSR10 Pro outer barrel just to be slightly unique.. Hehehe.... :D

[Snake]

Cool! Nice internal parts you've got there.

[mamba]

Reign-Mack, on 22 December 2009 - 09:04 PM, said:

nice but you are going to need a different set of inner barrel spacers if you are building a G-spec as its not tapered like the pro,
you will also need to drill a much wider hole in the end of your gspec to fit that inner bull barrel through. Will need to hide the end under the silencer.

Well said................modification 101........heheheeheheeh!

[Dragon Ace]

Duffy, on 22 December 2009 - 08:54 PM, said:

I wonder how the trigger sear fares up against the Zero trigger..!

Another additional info.; EdGI does a piston with a 90 deg. end which makes it compatible to V/Zero trig.

mamba, on 23 December 2009 - 10:27 PM, said:

Well said................modification 101........heheheeheheeh!

As mentioned above, I'll be using a G-Spec base with a Pro Sniper outer barrel just to make it look even more sexy.. ;)

[pinkyanthebrain]

hi all, am having a git of a problem with my vsr, i hve just fitted new deep fire trigger sear to her, every thing is fine when i cock the her and push the bolt forward, but when i go to lock the bolt down she fires on me, any one got any adice how i can sort it, cheers mark

[Bodgeups]

Topics have been merged.

What piston sear and piston are you using?