[Scuffer]

Hello all, firstly - I'm not too sure if this is the right section for this thread but I'm sure as the site beds-in it can be moved accordingly.

Next, from the ASCUK days, the L119A1 thread was packed with pictures, information and general showing off, lets try and get that back for UKAZ!

Starting tomorrow, I'l throw up some real-steel reference pictures as well as some of my ICS L119A1 CQB project.


Tim http://www.ukairsoftzone.co.uk/forums/public/style_emoticons/default/wink.gif

Edit: Added Diemaco to the thread title

This post has been edited by perr_mike: 12 December 2009 - 17:51

[perr_mike]

ABout time we got some Pics in here...

Heres my 10" Diemaco, pretty much finished all I want to do now is change the ACOG for one with the Doctor sight and give it a dusting of Krylon.

http://i151.photobucket.com/albums/s127/perr_mike/IMG_0003-33.jpg
http://i151.photobucket.com/albums/s127/perr_mike/IMG_0001-45.jpg


SPECS:

CA CQB Base with outer barrel trimmed and rethreaded by half an inch to get down to 10"
Guarder large "Stow away" Grip
Standard TM M4A1 Stock with Guarder stock pad
Element SF Scout light (Note the NBC tape to protect the wiring this is the weak part of the clone and real deal I'm told)
SF556 Flashhider (Same version as on Ebaybanned)
DYTAC Peq 15 (Dummy)
ACM ACOG (The one pictured is a x4 I also use a red dot version)
I run a 11.1v Lipo in the stock tube (Its eaten on set of gears already)
Unknown Make ready mag.

I'm in the middle of another 16" build, I current have a short and long top end to fit the same lower but have decided its less hassle just to have another :)

This post has been edited by perr_mike: 12 December 2009 - 10:24

[1st commando]

I'll have to wait until after the weeeknd to get some pics of My L119-a1 aeg and L119-a1 GBB

[Ezek]

Heres my WIP, not 100% up on UKSF stuff so any tips would be greatfully recieved, still need to blast ths with krylon.

http://i46.photobucket.com/albums/f127/kieren1984/IMG_2714.jpg

[perr_mike]

Thats spot on mate, you could miliput the foresight but its not essential as they been seen with the standard M4/ M16 foresight aswell. SBS Qala-I-janghi loadout in the making?

[icarus3815]

Not bad at all!!!

Extra points for the holster as well, you dont see many of them around these days, and to me they were still better than the 6004's!

[Blackweell!]

G&P WOC based GBB L119A1 :)

http://i58.photobucket.com/albums/g268/chrisblackie/fcc6f27e.jpg
http://i58.photobucket.com/albums/g268/chrisblackie/5783a6e9.jpg
http://i58.photobucket.com/albums/g268/chrisblackie/ebccb617.jpg

[perr_mike]

Very nice, what flashhider is that in the first pic?

This post has been edited by perr_mike: 12 December 2009 - 12:04

[Blackweell!]

perr_mike, on 12 December 2009 - 12:04 PM, said:

Very nice, what flashhider is that in the first pic?

That would be the Vortex flash hider!

[icarus3815]

Here's me and my mates attempts at catterick last year.

http://i217.photobucket.com/albums/cc28/icarus3815/l119a1.jpg

Mines is the one on the left:

Systema PTW
RS KAC RIS
RS AN/PEQ-2
RS Surefire scout light
KAC VFG
Trijicon NSN ACOG
Guarder PTW storm grip
VFC standard m4 stock
Diemaco butt pad, albeit in the wrong colour!

Need to get newer photos up as after a small accident it now has a new upper, and a repro SF556 can from a very nice man.

Glad to see this thread resurface, it was always an absolute wealth on information, and a fine example of people all over the country pulling together for a common goal.

[Ezek]

Cheers guys, SBS Qala-I-janghi loadout almost done, need somewhere good to get pics though

[sunray]

Here are some reference pics.....sorry about the quality

Attached File(s)

•  RMP Front Cover.jpg (348.62K)
  Number of downloads: 214
•  RMP Rear Cover.jpg (324.21K)
  Number of downloads: 297
•  CP VIP Training.jpg (270.87K)
  Number of downloads: 247

[perr_mike]

I'm fairly sure I have hi-res images of those 3 Sunray (On my work machine). They're all red cap CP pics arent they?

[taffy]

Just to be a PITA.. will you ever be commisioning another run of barrel extensions Mike?
(this has nothing to do with me getting a G&P shorty with an 11.5 barrel)

[perr_mike]

No more runs (I think the market is nearly saturated http://www.ukairsoftzone.co.uk/forums/public/style_emoticons/default/tongue.gif ) but Bob's made enough £££'s out of it now he'll do one off's. Won't be able to get anything done until the new year though as he's back in Spain from Monday. What are you after?


Edit: Now I see, not done one for 11.5" barrel before but shouldnt be a problem :)

This post has been edited by perr_mike: 12 December 2009 - 21:38

[taffy]

Oh no rush anyway Mike ;)

I've a G&P with a +Ve threaded 11.5" outerbarrel (M733 lenght IIRC - i'll measure it in the morning!)that i'd like to make up into an L119 full and CQB length.
As it is i'm awaiting the correct pistol grip and the RIS to land (cheers mr postman <_< ) so it's just obtainig the correct front sight and it's nearly there (bar a more suitably trademarked reciver if i want to be utterly pedantic)

[perr_mike]

If you want to do a CQB and 16" you'll need the 733 barrel trimmed down to 10" (But I can sort you out with that too in either +ve or -ve thread).

You'll struggle finding the correct sight though, Army code didn't make many and have since discontinued it. You can get by with a little miliput or just cheat and wrap some NBC/ Sniper tape in the right place ;)

I've not bothered with a body myself, last I heard they were engraved Dboys bodies which I've had no end of trouble with.

[taffy]

Frankly i'll keep the 11.5" i'm not overly pedantic ;) But a 16" extension would be super.

I feared so on the sight I might have a pop at mocking one up or just live with a std one ;)

[perr_mike]

http://www.ukairsoftzone.co.uk/forums/public/style_images/master/snapback.png' alt='View Post' />taffy, on 12 December 2009 - 10:04 PM, said:

Frankly i'll keep the 11.5" i'm not overly pedantic

It only costs a fiver plus whatever your postage is :)

[Rev Golightly]

Get pics of mine up soon as I get my vert grip from those slow posting slitty eyed bastards