Does anyone have any info on any of the cheap soft mich 2001, have been looking for a j-tech for months however they have been completely discontinued. Sadly looking at this one,
http://www.ebairsoft...aki-p-2747.html
Thanks for any info.
Carl
Page 1 of 1
Mich 2001
#2
Posted 11 March 2010 - 13:17
I was looking for a J-tech 2001 last year too, I finally gave up and bought a cheap arse ACM one - I forget from where exactly.
I ripped out most of the inner padding, swapped the chin strap system for a real MICH set that I'd got from Supply Captain, stuck a Norotos mount on it and then sprayed the lot with some Krlyon. Turned out ok.
http://i307.photobucket.com/albums/nn301/pthomo_photos/Airsoft/DSC00740.jpg
I ripped out most of the inner padding, swapped the chin strap system for a real MICH set that I'd got from Supply Captain, stuck a Norotos mount on it and then sprayed the lot with some Krlyon. Turned out ok.
http://i307.photobucket.com/albums/nn301/pthomo_photos/Airsoft/DSC00740.jpg
#3
Posted 11 March 2010 - 14:55
I've found my 2002 from Ebaybanned quite quickly chips: not the paint, but the actual shell! In places, you can see bits of the inner shell from where BBs have hit, which is a shame!
#4
Posted 12 March 2010 - 00:40
Thanks for the info fellas, and thanks for posting the pic up tomo, If I end up getting one its going to be modded alot, RD pading etc same as yours and to be fair for the shell chipping etc not really to fused, for the price your paying doesnt surprize me.
shriven how did you find the fit?
shriven how did you find the fit?
#5
Posted 12 March 2010 - 20:16
Well, I've got a large bonce, and I suspect the lids are medium lids, so not fantastic. Adequate, but I think it could be better.
I put an OPS Core chinstrap on mind, and to get down over my ears like it should do ( the 2002 should cover a wee bit of your ears), I had to pull it all the way down and take out the top pad.
I put an OPS Core chinstrap on mind, and to get down over my ears like it should do ( the 2002 should cover a wee bit of your ears), I had to pull it all the way down and take out the top pad.
#6
Posted 12 March 2010 - 20:37
My 2001, waiting on ITT Swing Arm for my NVG.
http://i264.photobucket.com/albums/ii179/jackmorris86/SDC10713.jpg
Just Mich
Petzl Taktikka
Norotos mount( replica)
Norotos rhino ( Real)
Real Mich chinstrap
ACR MS2000
Retention loops
IR flag
Dithced the ESS Goggles as i never used them.
http://i264.photobucket.com/albums/ii179/jackmorris86/SDC10713.jpg
Just Mich
Petzl Taktikka
Norotos mount( replica)
Norotos rhino ( Real)
Real Mich chinstrap
ACR MS2000
Retention loops
IR flag
Dithced the ESS Goggles as i never used them.
This post has been edited by Stoner 17: 12 March 2010 - 20:37
#7
Posted 13 March 2010 - 12:12
Heres one for ya's, am going to be modding my real steal PASGT into a MICH 2001, i know there will be a lot of work needed, but i need some good pics of each side of a Mich 2001 even the back plz, any one help ???
Page 1 of 1

Sign In
Register
Help
MultiQuote